HI-981034 pH Tester for Milk

HI-981034 has a specialised conic tipped pH electrode with a glass body. The specialised pH electrode is rugged and easy to clean. The open junction design consists of a solid gel interface (viscolene) between the sample and internal Ag/AgCl reference. This interface not only prevents silver from entering the sample, but also makes it impermeable to clogging after measurements in semi-solid or viscous samples. About the tester Liquid Crystal Display On/off button pH probe with maximum & recommended immersion level Press the on/off button to turn the meter on. All tags will be displayed. The meter will go into measurement mode with current reading and calibrated buffers displayed. The meter has a range of 0.0 to 14.0 pH and a resolution of 0.1pH with accuracy at ±0.2pH @ 25°C. Calibration is automatic at one or two-point. The built-in probe is for the specific application listed. With an easy to change battery facility, the HI-981034 has an approximate battery life of 1000 hours of continuous use and has an auto-off feature enabled after 8 minutes or 60 minutes. Featuring a liquid crystal display, the meter weighs in at 50g and measures 51 x 159 x 21mm. For best results, operate in 0 to 50°C, RH 95% max environment. The meter is shipped with a protective cap on the electrode containing storage solution. Each meter is supplied with: pH 4.01 buffer solution liquid sachet x 2 pH 7.01 buffer solution liquid sachet x 2 Cleaning solution for milk deposits x 2 Electrode storage solution, 13mL dropper Instruction manual Quality certificate